LDPE PP 回收厂用塑料薄膜洗衣机
| 长度 | 15-20m |
| 转轮数量 | 10 |
| 每两轮之间的距离 | 1.5-2m |
| 申请材料 | PP PE PVC PS 塑料废料 |
您现在可以向我们的项目经理询问技术细节
塑料薄膜清洗机是塑料薄膜回收生产线中常用的塑料清洗设备之一，用于冲洗塑料碎片和去除塑料上的贴纸残留物。塑料清洗槽采用不锈钢材质，不易生锈，使用寿命长。
塑料薄膜清洗机的应用
PE薄膜清洗机主要清洗塑料薄膜片。塑料薄膜撕碎机将废旧塑料袋粉碎后，塑料垃圾仍然是脏的。由于塑料袋上有较多的油污、灰尘、油漆等污渍，所以使用前需要清洗干净。 造粒.
Therefore, it is very necessary to send it to the plastic cleaning tank so as to improve the quality of the recycled pellets and increase economic efficiency.
塑料清洗机工作原理
The plastic recycling washing machine is mainly composed of the water tank, rotating gear, drainage port and other structures. When the plastic piece enters the water tank, the rotating gears will drive a large amount of plastic to tumble and clean during the rotation, and convey it to the next gear.
A total of ten gears are installed on the water tank. Their continuous circular tumbling motion thoroughly agitates the plastic, helping remove dirt and residue for a more complete and effective cleaning process.
塑料清洗槽工厂展示
总共需要10个旋转齿轮，每两个搅拌轮之间的距离为1.5-2米，整机长度约为15-20米。起毛机颜色可根据客户需求定制。
在完整的 塑料回收线，冲洗槽始终与 脱水机，用于提升罐内的物料并去除其多余的水分。
